526622 SME-8-SL-LED-24 Festo Proximity Sensor (Pack of 2)
$45.00
3 in stock
526622 SME-8-SL-LED-24 Festo Proximity Sensor (Pack of 2) (Barely Used & Fully Tested)
Product Category
Proximity Sensors
Sensor Technology
Magnetic Proximity Sensor
Specifications
Switching Frequency
0.5000 kHz
Operating Temperature
-40 to 140 F (-40 to 60 C)
Electrical
Power Requirements
AC Powered; DC Powered
| Design | For T-slot |
| Complies to standard | EN 60947-5-2 |
| Permission | RCM mark |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Material information | Copper and PTFE-free RoHs compliant |
| Measurement principle | Reed magnetic |
| ambient temperature [°C] | -40 to 60 |
| Control output | Bipolar contact |
| Switching element function | NO contact |
| Reproducibility of the switching value | ± 0,1 mm |
| Switch on time [ms] | <= 0,6 ms |
| Switch off time [ms] | 0,05 |
| Max. switching frequency [hz] | 500 |
| Max. output current [mA] | 500 |
| Max. switching capacity AC [Voltampere] | 10,0 |
| Max. switching capacity DC [W] | 10,00 |
| Voltage drop [V] | 0 |
| Short circuit resistance | no |
| Overload resistant | Not available |
| Operating voltage range AC [V] | 10 to 30 |
| Operating voltage range DC [V] | 10 to 30 |
| Reverse polarity protection | no |
| electrical connection: | M8x1 3 pin Plug |
| Connection outlet direction | along |
| Fastening type | clamped in t-slot Push-in lengthwise into the slot |
| Torque [Nm] | 0,2 |
| Product weight [g] | 5,0 |
| Housing material | PC PET High-alloyed stainless steels Epoxy resin |
| Switching status indicator | LED yellow |
| Protection category | IP65 IP67 |
| Insulation voltage [V] | 50 |
| Surge voltage strength [kV] | 0,8 |
| Degree of contamination | 3 |
- Selection Required: Select product options above before making new offer.
- Error: There was an error sending your offer, please try again. If this problem persists, please contact us.
Related products
Sensor
$50.00
Out of stock
$198.00
Out of stock
$60.00
